Mini One Cooper 1.4 1.6 2.0 D SD Diesel chip tuning box Bluespark CR Tech 2

  
Note: you must provide vehicle details when ordering. Up to 30% more power and torque. Up to 15% economic benefits. 30% Power & Torque Increase. Don't forget to confirm. Year of manufacture or UK reg. CR TECH 2 - DIGITAL MICROPROCESSOR MULTI-CARD ADJUSTMENT MODULE. The CR Tech 2 is one of our best-selling tuning boxes and simply connects to your fuel sensor. The unit then maps the engine to use fuel more efficiently. Once installed, our tuning modules aim to give you more usable power and much more available torque. As a by-product of this, your turbo lag will be significantly reduced, making the car much more enjoyable to drive.

The additional torque also allows the car to pull better at low revs, meaning you can shift to a higher gear more often, reducing fuel consumption by up to 15%. The extra torque will be of great help if you are towing a trailer or caravan. Compared to the original CR Tech unit, using improved technology, the CR Tech 2 offers simplified tuning, improved mapping, multi-channel capability, and reprogrammable hardware, meaning you can now set up your box for your next vehicle when you decide it's time for something new. Programmed with engine-specific maps, these digital microprocessor units are manufactured by Bluespark Automotive in the UK under their CR Tech brand. We are both the manufacturer and the retailer.

Depending on your engine's capabilities, our tuning boxes can increase power and torque by up to 30%. When developing maps for new engines, we aim to create maps that will provide the best possible gains without affecting reliability. To see what performance gains we can provide for your engine, please contact us and provide your vehicle details, including stock power. For maximum performance, we recommend the Bluespark Pro + Boost tuning box.

Please contact us for more details. For diesel vehicles, we expect to see fuel economy improvements of up to 15%. This means if you currently get 40 MPG, you could expect to see around 46 MPG.

This depends a lot on your driving style. If you use the extra power and drive faster naturally, the economic benefits will be reduced. Most installations will not take more than 10 minutes. The rail sensor will be located at the top of the engine and will be accessible by removing the engine cover.

Some engines take a little longer. We have a range of videos on our YouTube channel offering guides and tips on installing and using your device. Please click on the following link or copy and paste the URL into your browser.

The engine below takes the longest to install as it requires removal of the battery tray, we recommend watching the installation video before purchasing. 1.4, 1.5, 1.6 HDi/TDCi, the 1.6 engine is also used in some Mini, Mitsubishi, Volvo, and Mazda vehicles. If you cannot locate your common rail, feel free to contact us and we will be happy to advise you on how to install your engine. We offer free installation on most vehicles at our Houghton-le-spring depot, DH4 5RJ. In addition to the 28-day money-back guarantee, we offer a 2-year warranty on the product. If the item develops a defect during the warranty period, we will cover the cost of repairing or replacing the item.

The duration of the warranty will be provided with each item. Warranty terms and conditions vary greatly from manufacturer to manufacturer, but most manufacturers have a dim view of any modification that increases power output.

Fortunately, unlike a remap, our products are 100% removable with no trace of fitting. If you remove your tuning box before your vehicle goes into service or warranty, your warranty should not be affected in any way. Once you have placed and ordered, you will need to provide your vehicle details. The units we sell are mapped specifically to your engine, and these details will allow us to provide the correct maps, connectors, and instructions.

The following details are required. Make and model of the vehicle.

Power output (bhp, ps, or kw). BMW 320D 2012 1995cc 84bhp. We will contact you as soon as possible if we need further information. We will not be able to ship your item until these details are provided.

WHAT IS INCLUDED IN THE PACKAGING. Wiring harness with connectors suitable for your engine.

User setup and tuning guide. Cable ties to secure the unit and wiring. Bypass plug (provided only for engines that may have a hard-to-reach sensor).

We aim to ship all items the same day where possible. Shipping within the UK will usually be delivered within 2 days of shipping.

Shipping abroad may take up to 10 working days depending on the local delivery service. In order for us to ship your item, we will need your vehicle details. Please confirm the make, model, year of manufacture, engine size, and power output when ordering. UK and Irish customers can also provide their registration numbers.

The CR Tech 2 uses reprogrammable technology, so when you change vehicles, you can return your device to us for reprogramming on any compatible vehicle. Note: for insurance purposes, the reprogramming service is only available to the original buyer of the device and is not available for units purchased second hand. We offer a 28-day money-back guarantee with all products. All we ask is that you contact us before returning the item as we may be able to offer a simple solution.

If you feel we have given you anything less than a great experience, please let us know before leaving feedback. Bluespark Automotive is a UK manufacturer and seller of turbo diesel and petrol tuning devices.

We are one of the few UK tuning suppliers who design, develop, and manufacture their own products. All our units are manufactured and sold from our Houghton-le-spring base, Tyne & Wear, DH4 5RJ.

We have years of experience and will be able to advise you on what our products can offer and what is suitable for your car. We have vehicle research facilities and can identify your engine details and power output from your registration number if needed. This also means you can install our units with confidence, if you have any issues, you can call us and our support staff will be able to assist you.

You must provide your vehicle details when ordering. Send us a message with the make, model, engine size, and power output. UK and Irish buyers can.