BMW Mini One Cooper 1.6D 112HP Turbocharger 5435-970-0047

  

This product sheet is originally written in English. Please find below an automatic translation in French. If you have any questions please contact us. MINI / BMW 1.6D 112HP-82KW 54359700039 / 41 / 47 Turbocharger Turbo + Gaskets.

NO EXCHANGE REQUIRED, YOU CAN KEEP THE ORIGINAL TURBO. This turbocharger has been fully disassembled, standard parts replaced by the following upgraded parts: Super lightweight custom billet compressor wheel with extended tip (made in Germany) Small nose hub resulting in a larger blade surface El.

Actuator Reverse threaded shaft nut Large pad stainless steel thrust collar Latest robust high temperature ball bearings 360° Race thrust bearing with large pad High temperature staggered spacing front and rear oil seals. Balanced CHRA turbocharger core using the TurboTechnics VSR400 system, at a speed range higher than the standard of 180,000 rpm.

With tolerances of 0.5g. 54359700039 54359700041 54359700047 54359700056, 54359710039 54359710041 54359710047 54359710056, 54359880039 54359880041 54359880047 54359880056, 11658506724 8506724 7812318 8573105. In order to smoothly operate our hybrid turbocharger, you would need some mods, to get the best results and avoid any engine or turbocharger damage. For the best results and optimal boost and HP numbers, you would need. EGR and DPF deletion Custom ECU mapping Stage 1 turbos do not require immediate reprogramming and can be run with stock engine settings, but for optimal results, a remap is necessary. Other essential requirements when fitting the Falcon STAGE 1 hybrid turbo. High quality new oil and oil filter. New gasket kit [provided with new turbo].

All work must be carried out by a professional garage or qualified technician. Upgraded bearings and seals: Staggered piston rings and compressor to staggered bearing dual oil feed thrust bearing, large pad.

Extended tip billet compressor wheel: Lightweight, machined from solid aluminum compressor wheel, it is much. Stronger and lighter than standard cast aluminum wheel.

Larger billet compressor wheel and billet backplate: Stage 2 hybrid turbos benefit from a larger diameter (usually 5 to 7 mm). Increased billet compressor wheel and custom billet backplate.

The compressor cover is precision machined to accommodate the larger. Larger high-flow shaft: Stage 3 turbos come with larger high-flow shafts to cope with excessive exhaust gases.

Flow due to increased boost and fuel injection. High-flow shafts have larger blades that will allow more exhaust gas. They are also lighter thanks to an improved design. GTB2260V Original wheel shaft weighs 175 g, Falcon Turbo Developments. The improved lightweight shaft weighs only 135 g.

Upgraded actuator wastegate: All Stage 3 turbos will come with upgraded actuators with different spring load settings. For optimal boost pressure and reach. The customer is required to pay interest on any overdue payment at the current Lloyds Bank base rate plus 2 percent. Credit Account 2.1 Where it is agreed that a customer will be granted credit for a particular order, Falcon Turbo Developments LTD (later referred to as FTD LTD) will issue an invoice for the goods supplied in accordance with that order.

The customer must pay the full amount due under the invoice no later than within 10 working days. Exchange Product 3.1 Falcon Turbo Developments LTD will not accept exchanges of old units unless they meet the following specifications (i) The unit must be complete and not disassembled in any way. (ii) The unit must not have suffered any accidental or deliberate damage. Surcharge 4.1 Where it is agreed at the time of sale that an old unit will be part of the consideration provided by the customer and the old unit is not provided by the customer to FTD LTD at the time of sale, a surcharge will be payable by the customer. This surcharge will be refunded by FTD LTD to the customer provided that the old unit agreed to be part of the consideration is provided by the customer to FTD LTD within 14 days of the sale and provided that this old unit meets the specifications of clause 3 of these General Conditions at the time it is so required.

If the customer does not return the exchange unit within 14 days, the turbo warranty will be void and the refund will be retained by the seller. Warranty 5.1 In the event that products manufactured by FTD LTD are found to be defective during the warranty period due to a material or manufacturing defect, FTD LTD shall, at its discretion, either provide a replacement product or repair these defective products free of charge.

If the official report from the supplier, the report from an independent specialist or any other official report indicates that the turbocharger is not defective or is defective due to an installation or engine defect, additional costs for testing or other expenses must be covered by the buyer. 5.2 The warranty period is as specified on the receipt and runs from the invoice date. 5.3 The warranty is between FTD LTD and the customer and extends to the first end user of the initial sale ("first end user"). In the event that the first end user sells the vehicle or engine on which the turbocharger provided by Turbocare24 is installed, the benefit of the unexpired part, this warranty does not automatically pass to the new owner.

5.4 FTD LTD will not be liable under the warranty if the vehicle on which the FTD LTD product is installed is not properly maintained in accordance with the vehicle manufacturer's recommendations. 5.5 FTD LTD will not be liable under the warranty if the Standard turbocharger supplied by them and/or the engine of the vehicle on which it is fitted is modified to increase the power output. 5.5.1 Stage 2 and 3 hybrid turbos supplied by FTD LTD must be installed and remapped at the same time by a professional road tuning company. Vehicles equipped with a hybrid turbo must not be driven before being mapped, as this would increase exhaust gas temperature and damage the turbo/engine. 5.5.2 Hybrid turbos must be fitted with support modules and not exceed recommended specifications.

5.6 FTD LTD will only be liable under the warranty if the turbocharger is fitted by a professional garage, able to justify their work and the parts ordered by the receipt. 5.7 The warranty does not cover turbocharger damage caused by impact from a foreign body from the exhaust or intake, lack of oil/contamination, excessive boost or exhaust gas temperature and pressure.

5.7 The FTD LTD turbocharger warranty report must be carefully reviewed and work must be carried out in accordance with the recommended information. 5.8 The FTD LTD warranty does not apply to turbochargers used for any form of racing. Limitation of Liability 6.1 Except as expressly provided herein, all representations, conditions, warranties and terms, whether express or implied by common law, statute or otherwise, as to the quality, condition or fitness for any purpose of the goods supplied by FTD LTD are excluded. 6.2 The receipt of customer information and delivery by FTD LTD of the goods specified in any order shall in no way imply a condition that the goods will be fit for the disclosed purposes. 6.3 In no event shall FTD LTD be liable for any direct, indirect, consequential or other loss or damage of any kind, whether arising from the sales contract or the manufacture, adjustment or use of the goods supplied by them, or for any reason whatsoever, nor for any diminution in the value of other goods or components, whatever it may be, arising from or resulting from the use of FTD LTD products.

6.4 Without prejudice to the foregoing, FTD LTD's liability, whether arising from a contract, negligence or otherwise, shall in no event include damages for the cost of labor necessary for the removal and reassembly of any turbocharger. 6.5 Without prejudice to the foregoing, FTD LTD's liability, whether arising from a contract, negligence or otherwise, shall in no event include damages for loss of use or travel expenses. 6.6 Without prejudice to the foregoing, FTD LTD's liability, whether arising from a contract, negligence or otherwise, shall in no event include damages for loss of profit.

6.7 Without prejudice to the foregoing, FTD LTD's liability for any claim for loss or liability arising from or related to any order, or manufacture, sale, delivery, resale or use of any goods covered by such order (including loss or liability resulting from a breach of contract and/or negligence) shall in no event exceed the ex. VAT unit sale price of the goods or parts thereof covered by the claim. 6.8 Without prejudice to the foregoing, FTD LTD shall not be liable for personal injury or damage to an engine or vehicle caused by a defective turbocharger when that turbocharger has been fitted to a modified engine or if the vehicle is used in any form of racing. 6.9 None of the above exclusions or limitations of FTD LTD's liability shall apply to any claim for death or bodily injury resulting from their negligence. By making this purchase, I confirm that I accept all the above terms and conditions of sale.

4.1 Where it is agreed at the time of sale that an old unit will be part of the consideration provided by the customer and the old unit is not provided by the customer to FTD LTD at the time of sale, a surcharge will be payable by the customer. 5.1 In the event that.